Standard Towbar Hitch Connector for Blue Ox Avail, Apollo, and Ascent Tow Bars - 3"

Video Transcript for Review of Blue Ox Standard Towbar 3 Inch Hitch Connector - BLU35CR

Hi, everybody. Andy here with etrailer.com, and today we're gonna take a real quick look at this Blue Ox Standard Towbar Three Inch Hitch Connector. This is going to replace the hitch connector for your Blue Ox Avail, Apollo, or Ascent towbars. And on your screen, I am including the model numbers of those towbars that this is going to work with. And this includes everything that you see here on the table before me. You're going to receive this hollow receiver.

And then you're gonna receive two pins and clips as you can see here. And then the hardware that you're going to need, along with the instructions to walk you through the simple installation process. And while we're here, let me go ahead and give you some measurements. First of all, I'm gonna measure the overall length of just the shank. So measuring end to end, as you can see, we are sitting right at 12 and 11 16ths inches long.

And then, in case you we're interested, the overall length, we are sitting right at about 19 and three quarters inches long from end to end. Now, this does have a weight capacity of 12,500 pounds. However, as with any towing setup, your overall towing capacity is only as strong as your weakest component, so make sure to refer to your towbar manual for your towing capacity. So this is directly from Blue Ox, so you can have the confidence that this is going to work with, and fit, your Avail, Apollo, and Ascent towbars. Well, that's gonna conclude our brief look today.

I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.